(bilayer) LED street lamp aging line with two layers

Used for testing/aging the LED lamp/bulbs during different temperature and voltage. easy to operate .stable performance

  Bilayer LED road lamp aging line with two layers !

  Specifications:

1.Loop chain conveying

2.Independent small car detecting /aging line

3.Model type:

12000L×2400W×750H(mm)  Other types only for you !

Fuctional features:		The aging led multi - function devices detect sophisticated dedicated to LED lights of finished products, including : aging with an outside line all ac(alternating current) LED products; sky lanterns,downlight; through a high voltage to the LED lamp, sophisticated atmospheric pressure, low pressure, the impact of roaming voltage area. Wide voltage adjustment range. Using the whole lamp sophisticated features an intuitive, easy to operate, for different varieties with various power of LED lights. Power system using frequency conversion timing system, simple operation.
Motor:		Specific speed for all adopt Taiwan brand 750W gear speed regulating motor, specific speed for 1:6; WPA100, 1:30 type of reducer, (made by sino-foreign joint ventures )1 HP frequency converter, frequency conversion stepless speed regulation, linear velocity 0- 5M min adjustable
Machine body and stand:		Made of 40×40×1.8mm rectangle steel pipe by welding. Machine body is made with 130×23×2mm strongthened aluminum profile special for aging lines. Head Tail plate with 1.2mm cold rolled plate bending forming, foot equipped with zinc plated adjustable foot glass, 2.0-meter of one paragraph.
Conveying chain:		By Shanghai Chain factory produces eight points double pitch double hole chain.
Aging small car:		Use 40x20 rectangle steel tube welding, specifications : 440x800x500 ( mm ) ; Up and down-two layers structure, panel use 4cm PCT insulation board , Each layer install 6 sets of four sound box line fixture, each small car installation zero, firewire conductive copper brush each all the way, cut-off switch one set; All about 46 sets of aging small cars.
Daily output:		One time can also aging 92 sets of LED street lamp or 3360 sets with perimeter(with out- lines) LED products. Aging time is about 1 hour, According to work 10 hours every day calculation, the daily output of about 920 LED street lamp.
Light shield:		Online decent on both sides of each lightshade all the way down ( except for Non - Operating Area ),assembled by 4mm tinted acrylic plate and aluminum alloy. Light attenuation of effective energy - saving lamps, better protection of eyes,a height of 450mm.
Conductive system:		With the aging car body along each side of the frame distribution with two road ( zero, the fire line ) conductive channel, along the both sides arrangement. Aging time adjustable.
Unchanged temperature region:		Temperature control system with electric heating type is complete, set up a two - block 2000w electric heating plate temperature automatic thermostatic room temperature 20-- 60, digital thermometer indicates.
Detect time line :		Set any beat - controlled areas.the time of Impact area from PLC control
Detecting aging roaming zone:		Set any zone as roaming zone to make voltage fluctuate with change of time at 180-220-250. Roaming zone time by the PLC microcomputer control.Detecing time adjustable.
Whole line voltage zones:		10KW, total 4 voltage regulators , total 6 valid zones ,3 Adjustable voltage regulator 0-250v, 1 adjustable regulator 0-300v. ( Specific distribution by your request may be ). Area of low pressure : 10kw0-250v lotus - type pressure regulator 1. Atmospheric pressure area : 10kw0-250v lotus - type pressure regulator 2 .     High Pressure Zone : 10kw0-300v lotus - type pressure regulator 1.
Electrical appliance control:		Digital display is used for voltage and motor instruction ,the entire electrical control system with PLC control, the regulator is 4, with 1 distribution control cabinet installation.

 

 

(bilayer) LED street lamp aging line with two layers